Не разворачивается ALDPro

Е.Р.

New member
Сообщения
3
#1
Бьюсь 2 неделю. Не разворачивается. Подскажите п-та в чем ошибки.
root@sage:~# astra-modeswitch get
2
root@sage:~# cat /etc/apt/sources.list
# Astra Linux repository description https://wiki.astralinux.ru/x/0oLiC

#deb cdrom:[OS Astra Linux 1.7.1 1.7_x86-64 DVD ]/ 1.7_x86-64 contrib main non-free
#deb https://download.astralinux.ru/astra/stable/1.7_x86-64/repository-main/ 1.7_x86-64 main contrib non-free
#deb https://download.astralinux.ru/astra/stable/1.7_x86-64/repository-update/ 1.7_x86-64 main contrib non-free

deb https://download.astralinux.ru/aldpro/stable/repository-main/ 1.0.0 main
deb https://download.astralinux.ru/aldpro/stable/repository-extended/ generic main

deb https://download.astralinux.ru/astra/frozen/1.7_x86-64/1.7.1/repository-base/ 1.7_x86-64 main contrib non-free
deb https://download.astralinux.ru/astra/frozen/1.7_x86-64/1.7.1/repository-extended/ 1.7_x86-64 main contrib non-free

root@sage:~# cat /etc/apt/preferences.d/aldpro
Package: *
Pin: release n=generic
Pin-Priority: 900
root@sage:~# cat /etc/hostname
sage.610.local

root@sage:~# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
127.0.1.1 sage
192.168.0.134 sage.610.local sage

# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

root@sage:~# cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 1.1.1.1
nameserver 192.168.0.134
nameserver 127.0.0.1
search 610.local


# The loopback network interface
auto lo
iface lo inet loopback

auto eth0
allow-hotplug eth0
iface eth0 inet static
address 192.168.0.134
netmask 255.255.255.0
gateway 192.168.0.123
dns-nameservers 1.1.1.1
dns-nameservers 192.168.0.134
dns-nameservers 127.0.0.1
dns-search 610.local

При установке aldpro-mp ошибки:
Created symlink /etc/systemd/system/multi-user.target.wants/krb5-kdc.service → /lib/systemd/system/krb5-kdc.service.
Job for krb5-kdc.service failed because the control process exited with error code.
See "systemctl status krb5-kdc.service" and "journalctl -xe" for details.
invoke-rc.d: initscript krb5-kdc, action "start" failed.
Samba is not being run as an AD Domain Controller: Masking samba-ad-dc.service
Please ignore the following error about deb-systemd-helper not finding those services.
(samba-ad-dc.service masked)
Created symlink /etc/systemd/system/multi-user.target.wants/nmbd.service → /lib/systemd/system/nmbd.service.
Failed to preset unit: Unit file /etc/systemd/system/samba-ad-dc.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on samba-ad-dc.service: No such file or directory
sssd-autofs.service is a disabled or a static unit, not starting it.
sssd-nss.service is a disabled or a static unit, not starting it.
sssd-pam.service is a disabled or a static unit, not starting it.
sssd-ssh.service is a disabled or a static unit, not starting it.
sssd-sudo.service is a disabled or a static unit, not starting it.
A dependency job for sssd-ssh.socket failed. See 'journalctl -xe' for details.
A dependency job for sssd-nss.socket failed. See 'journalctl -xe' for details.
A dependency job for sssd-autofs.socket failed. See 'journalctl -xe' for details.
A dependency job for sssd-sudo.socket failed. See 'journalctl -xe' for details.
A dependency job for sssd-pam.socket failed. See 'journalctl -xe' for details.
A dependency job for sssd-pam-priv.socket failed. See 'journalctl -xe' for details.
Job for sssd.service failed because the control process exited with error code.
See "systemctl status sssd.service" and "journalctl -xe" for details.
invoke-rc.d: initscript sssd, action "start" failed.
● sssd.service - System Security Services Daemon
Loaded: loaded (/lib/systemd/system/sssd.service; enabled; vendor preset: enabled)
Active: activating (auto-restart) (Result: exit-code) since Tue 2022-07-26 14:03:48 MSK; 18ms ago
Process: 10905 ExecStart=/usr/sbin/sssd -i ${DEBUG_LOGGER} (code=exited, status=4)
Main PID: 10905 (code=exited, status=4)
... because /etc/sssd/sssd.conf is not available yet
 

gfh1gfh1

New member
Сообщения
23
#2
Код:
deb https://download.astralinux.ru/aldpro/stable/repository-main/ 1.0.0 main
deb https://download.astralinux.ru/aldpro/stable/repository-extended/ generic main
В документации написано чтобы эти репозитарии были описаны в отдельном файле /etc/apt/sources.list.d/aldpro.list
может это влияет на pinning описанный в /etc/apt/preferences.d/aldpro

Как ставите aldpro-mp? В документации написано что надо так:
Код:
DEBIAN_FRONTEND=noninteractive apt-get install -q -y aldpro-mp
PS. Уже вышел ALD Pro 1.1.0, пробуйте его:
Код:
deb https://download.astralinux.ru/aldpro/stable/repository-main/ 1.1.0 main
deb https://download.astralinux.ru/aldpro/stable/repository-extended/ generic main
 

Е.Р.

New member
Сообщения
3
#4
Спасибо большое, 1.1 не помогло, видео смотрю. Общаюсь с тех. поддержкой
 
Сообщения
3
#6
Спасибо Дело было в спецсимволе "$" в пароле (То ли специально снижают стойкость пароля, то ли запрет на "не дружественные" знаки). "Защиту от дурака" в скрипте не включили, в документации запрет не указали.