# KDM master configuration file # # Definition: the greeter is the login dialog, i.e., the part of KDM # which the user sees. # # You can configure every X-display individually. # Every display has a display name, which consists of a host name # (which is empty for local displays specified in {Static|Reserve}Servers), # a colon, and a display number. Additionally, a display belongs to a # display class (which can be ignored in most cases; the control center # does not support this feature at all). # Sections with display-specific settings have the formal syntax # "[X-" host [":" number [ "_" class ]] "-" sub-section "]" # You can use the "*" wildcard for host, number, and class. You may omit # trailing components; they are assumed to be "*" then. # The host part may be a domain specification like ".inf.tu-dresden.de". # It may also be "+", which means non-empty, i.e. remote displays only. # From which section a setting is actually taken is determined by these # rules: # - an exact match takes precedence over a partial match (for the host part), # which in turn takes precedence over a wildcard ("+" taking precedence # over "*") # - precedence decreases from left to right for equally exact matches # Example: display name "myhost:0", class "dpy". # [X-myhost:0_dpy] precedes # [X-myhost:0_*] (same as [X-myhost:0]) precedes # [X-myhost:*_dpy] precedes # [X-myhost:*_*] (same as [X-myhost]) precedes # [X-+:0_dpy] precedes # [X-*:0_dpy] precedes # [X-*:0_*] (same as [X-*:0]) precedes # [X-*:*_*] (same as [X-*]) # These sections do NOT match this display: # [X-hishost], [X-myhost:0_dec], [X-*:1], [X-:*] # If a setting is not found in any matching section, the default is used. # # Every comment applies to the following section or key. Note that all # comments will be lost if you change this file with the systemsettings frontend. # The defaults refer to KDM's built-in values, not anything set in this file. # # Special characters need to be backslash-escaped (leading and trailing # spaces (\s), tab (\t), linefeed (\n), carriage return (\r) and the # backslash itself (\\)). # In lists, fields are separated with commas without whitespace in between. # Some command strings are subject to simplified sh-style word splitting: # single quotes (') and double quotes (") have the usual meaning; the backslash # quotes everything (not only special characters). Note that the backslashes # need to be doubled because of the two levels of quoting. [General] # This option exists solely for the purpose of a clean automatic upgrade. # Do not even think about changing it! ConfigVersion=2.4 # List of permanent displays. Displays with a hostname are foreign. A display # class may be specified separated by an underscore. # Default is ":0" StaticServers=:0 # List of on-demand displays. See StaticServers for syntax. # Default is "" ReserveServers=:1,:2,:3 # VTs to allocate to X-servers. A negative number means that the VT will be # used only if it is free. If all VTs in this list are used up, the next free # one greater than the last one in this list will be allocated. # Default is "" ServerVTs=-7 # TTYs (without /dev/) to monitor for activity while in console mode. # Default is "" ConsoleTTYs=tty1,tty2,tty3,tty4,tty5,tty6 # Where KDM should store its PID (do not store if empty). # Default is "" PidFile=/var/run/fly-dm.pid # Whether KDM should lock the PID file to prevent having multiple KDM # instances running at once. Do not change unless you are brave. # Default is true #LockPidFile=false # Where to store authorization files. # Default is "/var/run/xauth" #AuthDir=/tmp # Whether KDM should automatically re-read configuration files, if it # finds them having changed. # Default is true #AutoRescan=false # Additional environment variables KDM should pass on to all programs it runs. # LD_LIBRARY_PATH and XCURSOR_THEME are good candidates; # otherwise, it should not be necessary very often. # Default is "" #ExportList=LD_LIBRARY_PATH,ANOTHER_IMPORTANT_VAR # A character device KDM should read entropy from. # Empty means use the system's preferred entropy device. # Default is "" #RandomDevice=/dev/altrandom # Where the command sockets should be created; make it empty to disable # them. # Default is "/var/run/xdmctl" #FifoDir=/tmp # The group to which the global command socket should belong; # can be either a name or a numerical ID. # Default is 0 #FifoGroup=xdmctl # The user the greeter should run as. Empty results in root. # Consider the impact on LogSource when setting it. # Default is "" GreeterUID=fly-dm # The directory in which KDM should store persistent working data. # Default is "/var/lib/fly-dm" #DataDir= # The directory in which KDM should store users' .dmrc files. This is only # needed if the home directories are not readable before actually logging in # (like with AFS). # Default is "" #DmrcDir=/nfs-shared/var/dmrcs [Xdmcp] # Whether KDM should listen to incoming XDMCP requests. # Default is true Enable=true # The UDP port on which KDM should listen for XDMCP requests. Do not change. # Default is 177 #Port=177 # File with the private keys of X-terminals. Required for XDM authentication. # Default is "" #KeyFile=/etc/X11/fly-dm/fly-dmkeys # XDMCP access control file in the usual XDM-Xaccess format. # Default is "/etc/X11/fly-dm/Xaccess" #Xaccess= # Number of seconds to wait for display to respond after the user has # selected a host from the chooser. # Default is 15 #ChoiceTimeout=10 # Strip domain name from remote display names if it is equal to the local # domain. # Default is true #RemoveDomainname=false # Use the numeric IP address of the incoming connection on multihomed hosts # instead of the host name. # Default is false #SourceAddress=true # The program which is invoked to dynamically generate replies to XDMCP # DirectQuery or BroadcastQuery requests. # If empty, no program is invoked and "Willing to manage" is sent. # Default is "" Willing=/etc/X11/fly-dm/Xwilling [Shutdown] # The command (subject to word splitting) to run to halt the system. # Default is "/bin/systemctl poweroff" HaltCmd=/bin/systemctl poweroff # The command (subject to word splitting) to run to reboot the system. # Default is "/bin/systemctl reboot" RebootCmd=/bin/systemctl reboot # Whether it is allowed to shut down the system via the global command socket. # Default is true #AllowFifo=true # Whether it is allowed to abort active sessions when shutting down the # system via the global command socket. # Default is true #AllowFifoNow=true # The boot manager KDM should use for offering boot options in the # shutdown dialog. # "None" - no boot manager # "Grub" - Grub boot manager # "Lilo" - Lilo boot manager (Linux on i386 & x86-64 only) # Default is None BootManager=None # The command (subject to word splitting) to get MAC level for user. # Default is "/usr/bin/fly-mac-dialog -u %s" #MACCmd= # The command (subject to word splitting) to get the second password for user. # Up to two %s format items allowed: one for username, one for pam prompt. # Default is "/usr/bin/fly-dialog --password "%s, %s"" #PassCmd= # Rough estimations about how many seconds KDM will spend at most on # - opening a connection to the X-server (OpenTime) if the attempt # - times out: OpenTimeout # - is refused: OpenRepeat * OpenDelay # - starting a local X-server (ServerTime): # ServerAttempts * (ServerTimeout + OpenDelay) # - starting a display: # - local display: ServerTime + OpenTime # - foreign display: StartAttempts * OpenTime # - XDMCP display: OpenTime (repeated indefinitely by client) # Core config for all displays [X-*-Core] # How long to wait before retrying to connect a display. # Default is 15 #OpenDelay=15 # How long to wait before timing out a display connection attempt. # Default is 120 #OpenTimeout=120 # How many connection attempts to make during a start attempt. Note that # a timeout aborts the entire start attempt. # Default is 5 #OpenRepeat=5 # Try at most that many times to start a display. If this fails, the display # is disabled. # Default is 4 #StartAttempts=4 # Ping remote display every that many minutes. # Default is 5 #PingInterval=5 # Wait for a Pong that many minutes. # Default is 5 #PingTimeout=5 # The name of this X-server's Xauth file. # If empty, a random name in the AuthDir directory will be used. # Default is "" #AuthFile= # Specify a file with X-resources for the greeter, chooser and background. # The KDE frontend does not use this file, so you do not need it unless you # use another background generator than krootimage. # Default is "" #Resources= # The xrdb program to use to read the above specified recources. # Subject to word splitting. # Default is "/usr/bin/xrdb" #Xrdb= # A program to run before the greeter is shown. Can be used to start an # xconsole or an alternative background generator. Subject to word splitting. # Default is "" Setup=/etc/X11/fly-dm/Xsetup # A program to run before a user session starts. Subject to word splitting. # Default is "" Startup=/etc/X11/fly-dm/Xstartup # A program to run after a user session exits. Subject to word splitting. # Default is "" Reset=/etc/X11/fly-dm/Xreset # The program which is run as the user which logs in. It is supposed to # interpret the session argument (see SessionsDirs) and start an appropriate # session according to it. Subject to word splitting. # Default is "/usr/bin/xterm -ls -T" Session=/etc/X11/fly-dm/Xsession # The program to run if Session fails. # Default is "/usr/bin/xterm" #FailsafeClient= # The PATH for the Session program. # Default is "/usr/local/bin:/usr/bin:/bin" #UserPath= # The PATH for Setup, Startup and Reset, etc. # Default is "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" #SystemPath= # The default system shell. # Default is "/bin/bash" #SystemShell=/bin/bash # Where to put the user's X-server authorization file if ~/.Xauthority # cannot be created. # Default is "/tmp" #UserAuthDir= # If true, UserAuthDir will be used unconditionally. # Default is false #ForceUserAuthDir=true # Whether to automatically restart sessions after X-server crashes. # Note that enabling this makes circumventing screen lockers other than # fly-dm's built-in one possible! # Default is false AutoReLogin=false # Allow root logins? # Default is true AllowRootLogin=true # Allow to log in, when user has set an empty password? # Default is true AllowNullPasswd=false # Who is allowed to shut down the system. This applies both to the # greeter and to the command sockets. # "None" - no "Shutdown..." menu entry is shown at all # "Root" - the root password must be entered to shut down # "All" - everybody can shut down the machine # Default is All AllowShutdown=All # Who is allowed to abort active sessions when shutting down. # "None" - no forced shutdown is allowed at all # "Root" - the root password must be entered to shut down forcibly # "All" - everybody can shut down the machine forcibly # Default is Root #AllowSdForceNow=Root # The default choice for the shutdown condition/timing. # "Schedule" - shut down after all active sessions exit (possibly at once) # "TryNow" - shut down, if no active sessions are open; otherwise, do nothing # "ForceNow" - shut down unconditionally # Default is Schedule #DefaultSdMode=ForceNow # How to offer shutdown scheduling options: # "Never" - not at all # "Optional" - as a button in the simple shutdown dialogs # "Always" - instead of the simple shutdown dialogs # Default is Optional #ScheduledSd=Optional # The directories containing session type definitions in .desktop format, # ordered by falling priority. # Default is "/usr/share/fly-dm/sessions" SessionsDirs=/etc/X11/fly-dm/sessions,/usr/share/fly-dm/sessions,/etc/X11/sessions,/usr/share/xsessions # The file (relative to $HOME) to redirect the session output to. The # following character pairs are replaced: # - %d -> current display # - %u -> current user # - %r -> empty at first. See below. # - %% -> a single % # When the constructed filename cannot be used safely and the specification # contains %r, other names will be tried - this time expanding %r # to followed by a random number. # Default is ".xsession-errors" ClientLogFile=.xsession-errors-%d # Fallback when ClientLogFile cannot be used. The same expansions are # supported. DO NOT use relative paths here. # Default is "/tmp/xerr-%u-%d%-r" #ClientLogFallback=/var/log/xsession-errors/%u-%d%-r # Whether KDM's built-in utmp/wtmp/lastlog registration should be used. # Default is true #UseSessReg=false # Greeter config for all displays [X-*-Greeter] # Specify the widget style for the greeter. Empty means to use the # built-in default which currently is "default of Qt4". # Default is "" #GUIStyle=Plastique # Specify the widget color scheme for the greeter. Empty means to use the # built-in default which currently is "default of Qt4". # Default is "" #ColorScheme=MidnightMeadow # What should be shown in the greeter's logo are: # "None" - nothing # "Logo" - the image specified by LogoPixmap # "Clock" - a neat analog clock # Default is Logo LogoArea=Logo # The image to show when LogoArea=Logo. # Default is "/usr/share/fly-dm/pics/logo.gif" LogoPixmap=/usr/share/fly-dm/pics/logo.gif # The relative coordinates (X,Y in percent) of the center of the greeter. # Default is "50,50" #GreeterPos=30,40 # The screen the greeter should be displayed on in multi-headed and Xinerama # setups. The numbering starts with 0. For Xinerama, it corresponds to the # listing order in the active ServerLayout section of XF86Config; -1 means # to use the upper-left screen, -2 means to use the upper-right screen. # Default is 0 #GreeterScreen=-1 # The headline in the greeter. The following character pairs are replaced: # - %d -> current display # - %h -> host name, possibly with domain name # - %n -> node name, most probably the host name without domain name # - %s -> the operating system # - %r -> the operating system's version # - %m -> the machine (hardware) type # - %% -> a single % # Default is "Добро пожаловать в %n" GreetString=Добро пожаловать в %n # Whether the fonts used in the greeter should be antialiased. # Default is false AntiAliasing=true # The font for the greeter headline. # Default is "Verdana,12,bold" GreetFont=Verdana,12,-1,5,75,0,0,0,0,0 # The normal font used in the greeter. # Default is "Verdana,10" StdFont=Verdana,10,-1,5,50,0,0,0,0,0 # The font used for the "Login Failed" message. # Default is "Verdana,10,bold" FailFont=Verdana,10,-1,5,75,0,0,0,0,0 # What to do with the Num Lock modifier for the time the greeter is running: # "Off" - turn off # "On" - turn on # "Keep" - do not change the state # Default is Keep NumLock=On # Language and locale to use in the greeter, encoded like $LANGUAGE. # If empty, the settings from the environment are used. # Default is "" #Language=ru_RU.UTF-8 # Enable autocompletion in the username line edit. # Default is false UserCompletion=false # Enable user list (names along with images) in the greeter. # Default is false UserList=true # User selection for UserCompletion and UserList=true # "NotHidden" - all users except those listed in HiddenUsers # "Selected" - only the users listed in SelectedUsers # Default is NotHidden #ShowUsers=Selected # For ShowUsers=Selected. @ means all users in that group. # Default is "" #SelectedUsers=root,alex # For ShowUsers=NotHidden. @ means all users in that group. # Default is "root" #HiddenUsers=root # Special case of HiddenUsers: users with a non-zero UID less than this number # will not be shown as well. # Default is 1000 MinShowUID=1000 # Complement to MinShowUID: users with a UID greater than this number will # not be shown as well. # Default is 29999 MaxShowUID=29999 # If false, the users are listed in the order they appear in /etc/passwd. # If true, they are sorted alphabetically. # Default is true SortUsers=true # Specify, where the users' pictures should be taken from. # "AdminOnly" - from /$USER.face[.icon] # "PreferAdmin" - prefer , fallback on $HOME # "PreferUser" - ... and the other way round # "UserOnly" - from the user's $HOME/.face[.icon] # Default is AdminOnly FaceSource=AdminOnly # The directory containing the user images if FaceSource is not UserOnly. # Default is "/usr/share/fly-dm/faces" FaceDir=/usr/share/fly-dm/faces # Specify, if/which user should be preselected for log in. # "None" - do not preselect any user # "Previous" - the user which successfully logged in last time # "Default" - the user specified in the DefaultUser option # Default is None PreselectUser=Previous # If this is true, the password input line is focused automatically if # a user is preselected. # Default is false FocusPasswd=true # If this is true, the entered password is echoed as bullets. Otherwise, # no feedback is given at all. # Default is true #EchoPasswd=false # If true, krootimage will be automatically started by KDM; otherwise, the # Setup script should be used to setup the background. # Default is true #UseBackground=false # The configuration file to be used by krootimage. # Default is "/etc/X11/fly-dm/backgroundrc" #BackgroundCfg= # Whether to grab keyboard and mouse while the greeter is visible. Grabs # may improve security, but make on-screen keyboards, etc. unusable. # "Never" - never grab # "IfNoAuth" - grab if the display requires no X authorization # "Always" - always grab # Default is Never #GrabInput=Never # Hold the X-server grabbed the whole time the greeter is visible. This # may be more secure, but it will disable any background and other # X-clients started from the Setup script. # Default is false #GrabServer=true # How many seconds to wait for grab to succeed. # Default is 3 #GrabTimeout=3 # Warn, if display has no X-authorization (local auth cannot be created, # XDMCP display wants no auth, or display is foreign from StaticServers). # Default is true #AuthComplain=false # Random seed for forging saved session types, etc. of unknown users. # This value should be random but constant across the login domain. # Default is 0 ForgingSeed=1552163162 # Specify conversation plugins for the login dialog. Each plugin can be # specified as a base name (which expands to $kde_modulesdir/kgreet_$base) # or as a full pathname. # Default is "classic" #PluginsLogin=sign # Same as PluginsLogin, but for the shutdown dialog. # Default is "classic" #PluginsShutdown=modern # A list of options of the form Key=Value. The conversation plugins can query # these settings; it is up to them what possible keys are. # Default is "" #PluginOptions=SomeKey=randomvalue,Foo=bar # Show the "Console Login" action in the greeter (if ServerTTY/ConsoleTTYs # is configured). # Default is true #AllowConsole=true # A program to run while the greeter is visible. It is supposed to preload # as much as possible of the session that is going to be started (most # probably). # Default is "setxkbmap -model pc104 -layout us,ru -variant ," Preloader=setxkbmap -model pc104 -layout us,ru -variant , # Whether the greeter should be themed. # Default is true UseTheme=true # The theme to use for the greeter. Can point to either a directory or an XML # file. # Default is "/usr/share/fly-dm/themes/fly" Theme=/usr/share/fly-dm/themes/fly-flat # Enable the Alt-Ctrl-D shortcut to toggle greeter theme debugging. # Default is false #AllowThemeDebug=true # Command line to call virtual keyboard. # Default is "fly-vkbd --strut-bottom ..." VkbdCmd=/usr/bin/fly-vkbd --strut-bottom -s black_flat # Whether the virtual keyboard should be shown. # "false" - not show # "true" - always show # "auto" - show if touchscreen detected # Default is auto ShowVkbd=auto # Core config for local displays [X-:*-Core] # How often to try to run the X-server. Running includes executing it and # waiting for it to come up. # Default is 1 #ServerAttempts=1 # How long to wait for a local X-server to come up. # Default is 30 #ServerTimeout=30 # The command line to start the X-server, without display number and VT spec. # This string is subject to word splitting. # Default is "/usr/lib/xorg/Xorg" ServerCmd=/usr/lib/xorg/Xorg -br -novtswitch -quiet -keeptty # Additional arguments for the X-servers for local sessions. Usually "-nolisten tcp" # This string is subject to word splitting. # Default is "" ServerArgsLocal= # Additional arguments for the X-servers for remote sessions. # This string is subject to word splitting. # Default is "" #ServerArgsRemote= # The user the X-server should run as. Empty results - auto, i.e. 'root' or 'fly-dm' if KMS enabled. # Default is "" #ServerUID=fly-dm # The integrity level of the X-server. # Default is "8" #ServerILEV=8 # Restart instead of resetting the local X-server after session exit. # Use it if the server leaks memory etc. # Default is true #TerminateServer=true # Create X-authorizations for local displays. # Default is true #Authorize=false # Which X-authorization mechanisms should be used. # Default is "MIT-MAGIC-COOKIE-1" #AuthNames= # Need to reset the X-server to make it read initial Xauth file. # Default is false #ResetForAuth=true # See above AllowNullPasswd=true # See above AllowShutdown=All # Enable password-less logins on this display. USE WITH EXTREME CARE! # Default is false NoPassEnable=false # The users that do not need to provide a password to log in. NEVER list root! # "*" means all non-root users. @ means all users in that group. # Default is "" NoPassUsers= # Greeter config for local displays [X-:*-Greeter] # See above PreselectUser=Previous # See above FocusPasswd=true # Specify whether the greeter of local displays should start up in host chooser # (remote) or login (local) mode and whether it is allowed to switch to the # other mode. # "LocalOnly" - only local login possible # "DefaultLocal" - start up in local mode, but allow switching to remote mode # "DefaultRemote" - ... and the other way round # "RemoteOnly" - only choice of remote host possible # Default is LocalOnly LoginMode=DefaultLocal # A list of hosts to be automatically added to the remote login menu. The # special name "*" means broadcast. # Default is "*" #ChooserHosts=*,host1,host2,host3.local,login.domain.com # Show the "Restart X Server"/"Close Connection" action in the greeter. # Default is true AllowClose=true # Core config for 1st local display [X-:0-Core] # The VT the X-server should run on; auto-assign if zero, don't assign if -1. # Better leave it zero and use ServerVTs. # Default is 0 #ServerVT=7 # If the user should have an option to suspend the system if configured to (also in the desktop) # "None" - no "Suspend..." menu entry is shown at all # "Root" - the root password must be entered to suspend # "All" - everybody can suspend the machine # Default is All #AllowSuspend=All # Enable automatic login. USE WITH EXTREME CARE! # Default is false AutoLoginEnable=false # If true, auto-login after logout. If false, auto-login is performed only # when a display session starts up. # Default is false #AutoLoginAgain=true # The delay in seconds before automatic login kicks in. # Default is 0 #AutoLoginDelay=10 # The user to log in automatically. NEVER specify root! # Default is "" #AutoLoginUser=alex # The password for the user to log in automatically. This is NOT required # unless the user is logged into a NIS or Kerberos domain. If you use this # option, you should "chmod 600 kdmrc" for obvious reasons. # Default is "" #AutoLoginPass=secret! # The MAC label for the user to log in automatically. # Default is "" #AutoLoginMAC= # Immediately lock the automatically started session. This works only with # fly-dm sessions. # Default is false AutoLoginLocked=false # See above ClientLogFile=.xsession-errors # Greeter config for 1st local display [X-:0-Greeter] # See above PreselectUser=Previous # The user to preselect if PreselectUser=Previous # Default is "" DefaultUser=